Alesis RA-100
A long-time favorite of studio engineers and hobbyists alike, the rack-mountable Alesis RA-100 is known around the world for a reason. This unit has been fully recapped, cleaned, and is ready to get back in action! With individual channel volume control, it would be great as a secondary speaker amp, and its ability to keep cool without any noisy fans makes it a wonderful choice for your mixing setup.
Every link in your studio is critical to good mixes. Studio monitors, your board… even your amplifier.
Why not improve your mixes and step up to the Alesis RA-100 Reference Amplifier. An amp designed for the critical demands of production audio. With the RA-100 and your monitor speakers, the mix you hear in your studio is the mix you’ll here everywhere else.
The RA-100 is accurate, dead quiet, and at 00 Watts a side (Into 4 Ohms, 75 Watts into 8 Ohms), has the power to do the job. It’s like a straight line between your mixer and your monitors.
On stage the RA-100’s cool operation and unique protection circuitry make it ideal for PA and sound reinforcement, with the punch and clarity your performances deserve.
Plus, through ingenious circuit design the RA-100 handles peaks and overloads intelligently, so that it plays louder without audible distortion.
At $349 the RA-100 is the unbeatable value in reference amplification. Kick your old hi-fi amp out of your studio and get an RA-100 at your Alesis dealer today. You’ll hear exactly what you should be hearing.
-Sound on Sound Ad, 1991
Price: $175 Inquire Here!
Specifications:
Power Output: 100W into 4 ohms, 75W into 8 ohms
THD: 0.05% THD @ 1kHz (8 ohms), 0.19% THD @ 1kHz (4 ohms) per channel
Frequency Response: ±1dB 20Hz - 20kHz
Noise: 100dB below full output
Damping Factor: 200 @ 8 ohms
Input Sensitivity: 5 VRMS for full output
Input Impedance: 7 kohms, unbalanced
Input Connectors: 1/4"
Output Connectors: 1/4" and push clip terminals
Power Requirements: 120 VAC, 500 W Max
Dimensions: (WxHxD) 19"x3.5"x8"
Weight: 14.25 lbs